=== Transmission sandblasting machine technical parameters === Machine Model: JK-SS800-12 work cabin size 1200 * 1200 * 840 (mm) dust box motor 380V 50Hz 5.5kw Gun swing motor 380V 50Hz 0.4kw motor transport goods 380V 50Hz 0.75kw spiral back sand motor 380V 50Hz 0.4KW air pressure 2-7kg / cm2 flow 9.6m3 / min Number of guns: 6 guns, 8 guns 10 guns, 12 guns can also request a total power 380V 50Hz 7.1KW way dust filter box dust bag, dust box size: 1400 * 1400 * 2000 mm Overall dimensions 3200 * 1000 * 3000mm (L * W * H) can be customized according to customer product requirements; === transmission sandblasting machine biggest advantage. === 1, the device is divided into product delivery systems, blasting systems, sand back to the sand system, dust removal system. 2, the transmission system is the use of electrical control, can automatically adjust the speed of product delivery, typically 3 meters per minute. 3, sandblasting system is used to control each of the independent electrical blasting gun, the customer does not need to be shut down, as the case of blasting guns so as not to waste electricity, gas and abrasive. 4, each blasting guns can independently adjust the height and angle, and more to meet the needs of a variety of products. 5, the sand back to the sand system is the use of motor spiral back to the sand and wind back to the sand, to speed up the abrasive / sand accumulation and waste, then the abrasive / abrasive repeat a higher utilization rate. 6, dust removal system: typically use bag-type dust ventilation effect, upon request also available made of filter dust type.